Great size as it fits in my smallest pack behind/under the seat. Great for Presta and Schrader valve stems. Seems very sturdy.

Plenty fast enough for road and mountain bike tires. I prefer it to electric pump as I want dependability in my road repair tools. I also think it has advantages over cylinders by allowing gradual fills and is unlimited.

So I was riding on a trail with fresh snow, running very low psi and large 5 inch bud and lou tires on my framed alaskan carbon bike. Unfortunately the tire lost the bead and tube poped out so I had to fix it on the trail itself(if I didn't want to walk to bike in snow for another 3-5 miles. So to have the tube back in, I had to take the air out and then fill enough air in to have the bead seated. Fortunately someone came across with a lezyne mini pump with similar design and I was back on the trail. After coming back I wanted to get the similar pump, with following expectations :-

- Should have a tube to attach to the valve so that its easy to pump rather than pump those attach to valve itself.

- Should be light, small and portable with holder.

- should be reasonably prices

- should work with both presta and schrader

- should be able to pump fat tires, so something with a little more air volume.

this accomplished all the above points. I like the fact that the valve connector stows inside the pump itself. Now I always have it on the bike, or with me in the back pocket or camelback. This was cheaper than lezyne and I did not notice in performance so it was a bargain. Highly recommend for the above said reasons. I got the red color since I believe it was cheaper in all the color options.

**If you find my review useful then please click the 'Yes' in helpful. Keeps me motivated to share more experiences with the community**

This is a great, portable bike tire pump.

Made from aluminum, it’s small, lightweight and strong.

Perfect.

Yes, it takes a lot of pumps to fully inflate the tire. But this is designed for replacing a tube or just topping off your tire pressure while out on a ride. A larger pump is too big to take with you.

Mounts securely to your bike frame and has a rubber strap to ensure it will not come loose. I used the same screws holding my water bottle to attach the mount (included).

I chose this one over a CO2 inflator, which can run out. This pump is always ready.

Ok, it happened. I got a flat tire while out riding on the bike path. I keep a spare tube and a couple of tire levers in my seat wedge (a small bag designed to attach beneath the bike seat). That, and this Mini Bike Pump was all I needed to quickly change out the tube and ride home. Saved me a 3 mile walk back to the car (and I am often much further out on my rides).

Highly recommended.

OK, so this is my review for the "Premium Mini Road Bike Pump by PRO BIKE TOOL - High Pressure - Reliable, Compact & Light - Presta & Schrader Valve Compatible - Superior Quality & Performance - Great for Mountain & BMX Bicycle Tires"

First off this pump is absolutely georgeous. Given it's mounted on my bicycle, that matters a great deal!

The unit I bought is silver, and it just plain looks like a million bucks. I paid a pretty penny for my road bike, I want accessories that look awesome too!

Pros:

* Easy to pump.

* Fit's both types of bicycle valves

* Beautiful finish - very well made!

* This pump uses a short tube that has both bicycle valves on it It fits INSIDE the pump when it's not being used

* At each end the connections have a snap on cover - which is **SEALED** - with an O-Ring! Nice!

Cons: None. I mean it, none. The pump is awesome.

This pump will be going with me on many, many bike rides. Awesome!

This pump is a thing of beauty. The siping makes it easy to hold, the removable hose makes it easy to pump and makes for the smartest and least annoying way to switch between Presta and Schrader.

Works well with both valve types and the small size makes it easy to have along on rides.

I looked at a number of pumps to install on my new XC bike and finally decided on this one. Best decision I've made this year. (Well, the decision to retire was pretty good, too, but this one is certainly a close second.)

The pump is really a heavy-duty unit but without excessive mass. The machined aluminum outer tubes give you a definite feel of strength and durability. NEVER buy a pump that doesn't have a flex hose, and this one has a clever hose which accommodates both common styles of valve stems. The hose stores securely inside the pump, and there are very durable dust plugs on each end to keep dirt and grime out.

Based on the descriptions and reviews of other pumps the stroke volumes are usually pretty low. I was really surprised and delighted when I tried out the Mini pump...it seemed to kick up the pressure in my MTB tires by a pound every 10-15 strokes, which is comparatively very good. Again, while pumping the unit gives you a clear feeling that it is well made, stable, and durable.

The bracket is a heavy plastic that fits perfectly on standard braze-on points. The bracket has two clamp points, one made to fit the upper tube and the other to fit the smaller lower tube. Be sure to mount the bracket with the larger tube up. Once the pump is snapped into the bracket it is really secure, and the velcro cinch strap ensures that it will stay that way. I have put the bike with pump installed through some pretty rough trail conditions and it hasn't budged one bit. No rattles or other sounds...you'll never know it's there.

In short, I am impressed with the quality and function of this item, and would recommend this to anyone that doesn't want to walk back to the truck after a flat tire.

Yeah, I’m not sure I bought this for somebody else but if you have a bicycle, this is very very small and very convenient. If I had a bicycle, I would have one myself. I believe this is a good product.!

Die Verarbeitung und die verwendeten Materialien sind absolut hochwertig, die Funktionalität als leichtgewichtige Notfall-Luftpumpe für unterwegs mehr als gegeben.

Die Konstruktion wirkt durchdacht, vor allem mit dem flexiblen Anschluss-Schlauch, der jegliche Krafteinwirkung auf das Fahrradventil unterbindet sowie staubfrei, raumsparend und verlustsicher im Inneren der Pumpe aufbewahrt wird.

Zudem ermöglicht der Schlauch die Verwendung an zwei unterschiedlichen Ventilsystemen (Sclaverand und Presta) auf angenehm einfache Weise.

Bei maximal ca. 8 Bar werden an einem Rennrad 6 Bar sicher erreicht, womit man immer nach einer Panne wieder problemlos nach Hause kommt, um dort eine große Fußpumpe für den exakten und schneller erreichbaren Enddruck einzusetzen. (Die Minipumpe gibt es für einen geringen Mehrpreis auch in einer Version mit Manometer, wer dies bevorzugt.)

Mit dem auch neben einem bereits vorhandenen Flaschenhalter montierbaren Pumpenhalter, der über ein Klettband die Pumpe sicher am Rad hält, ist diese Minipumpe ihren sicherlich etwas höheren Preis mehr als wert. Wer weniger ausgeben will, bekommt, was er bezahlt!

Die lebenslange Garantie auf Herstellungsmängel (einfache Registrierung auf probiketool.com) sowie der erfreulich engagierte, freundliche und hilfreiche Service (aus England, jedoch perfekt deutschsprachig - für jene, die Wert darauf legen) machen das Gesamtprodukt zum Spitzenerzeugnis.

Die überwältigende Mehrheit der 5-Sterne für Verkäufer- UND Produktbewertungen sprechen ebenfalls für sich.

Auch mal im UK-Bereich lesen, dort finden sich deutlich (!) mehr Rezensionen:

www.amazon.co.uk/s?merchant=A2SPEM3E9B2GHB&fallThrough=1

Klare Kaufempfehlung!

Compact and beautiful pump, looks great on the bike and the mounting seems pretty solid with the strap.

The performance is okay, it inflates quickly and without much work until 45psi. After, you will have to do some heavy work. Good for a compact pump to carry on bike.

Per il momento non mi ha deluso.. la usata una decina di volte ed è valida al mio avviso.

I bought this to replace a CO2 device, which proved tricky to rely on. A pump has infinite air in it, doesn't cost anything to refill, and you can gladly offer it to a stranded cyclist by the roadside.

The reversible design that allows for Presta or Schrader fit is clever.

Due to its small size, it obviously takes longer than a large floor pump, but it wasn't too bad at all to fill even a 29x2.6" to firm, and it now lives permanently on my bike frame.

This pump has a nice feel to it, well machined. I have other products from Pro Bike Tool, so I guess I'm a fan of their tools and their lifetime warranty- I've only needed it once, but they looked after me. Thank you again.

Pompe utilisée sur pneus tubeless.

Plutôt efficace même si il faut une centaine d’inflations pour gonfler le pneu.

Taille raisonnable.

Fournie avec outil de fixation au cadre.

La pompe semble solide.

Au final, je la recommande