Absorbance Explained

In spectroscopy, absorbance (abbreviated as A)^[1] is a logarithmic value which describes the portion of a beam of light which does not pass through a sample. Whilst the name refers to the absorption of light, other interactions of light with a sample (reflection, scattering) may also contribute to attenuation of the beam passing through the sample. The term "internal absorbance" is sometimes used to describe beam attenuation caused by absorption, while "attenuance" or "experimental absorbance" can be used to emphasize that beam attenuation can be caused by other phenomena.

History and uses of the term absorbance

Beer-Lambert law

The roots of the term absorbance are in the Beer–Lambert law (or Beer's law). As light moves through a medium, it will become dimmer as it is being "extinguished". Pierre Bouguer recognized that this extinction (now often called attenuation) was not linear with distance traveled through the medium, but related to what is now referred to as an exponential function.

If

is the intensity of the light at the beginning of the travel and is the intensity of the light detected after travel of a distance the fraction transmitted, is given by:

$$T=\backslash frac\; =\; \backslash exp(-\backslash mu\; d)\backslash ,,$$

where

is called an attenuation constant (a term used in various fields where a signal is transmitted though a medium) or coefficient. The amount of light transmitted decreases exponentially with distance. Taking the natural logarithm in the above equation, we get:

$$-\backslash ln(T)\; =\; \backslash ln\; \backslash frac\; =\; \backslash mu\; d\backslash ,.$$

For scattering media, the constant is often divided into two parts,^[2] separating it into a scattering coefficient

and an absorption coefficient obtaining:

$$-\backslash ln(T)\; =\; \backslash ln\; \backslash frac\; =\; (\backslash mu\_s\; +\; \backslash mu\_a)\; d\backslash ,.$$

If the size of a detector is very small compared to the distance traveled by the light, any light that is scattered by a particle, either in the forward or backward direction, will not strike the detector. (Bouguer was studying astronomical phenomena, so this condition was met.) In such cases, a plot of

as a function of wavelength will yield a superposition of the effects of absorption and scattering. Because the absorption portion is more distinct and tends to ride on a background of the scatter portion, it is often used to identify and quantify the absorbing species. Consequently, this is often referred to as absorption spectroscopy, and the plotted quantity is called "absorbance", symbolized as Some disciplines by convention use decadic (base 10) absorbance rather than Napierian (natural) absorbance, resulting in: (with the subscript 10 usually not shown).

Absorbance for non-scattering samples

Within a homogeneous medium such as a solution, there is no scattering. In this case, researched extensively by August Beer, the concentration of the absorbing species follows the same linear contribution to absorbance as the path-length. Additionally, the contributions of individual absorbing species are additive. This is a very favorable situation, and made absorbance an absorption metric far preferable to absorption fraction (absorptance). This is the case for which the term "absorbance" was first used.

A common expression of the Beer's law relates the attenuation of light in a material as: where

is the absorbance; is the molar attenuation coefficient or absorptivity of the attenuating species; is the optical path length; and is the concentration of the attenuating species.

Absorbance for scattering samples

For samples which scatter light, absorbance is defined as "the negative logarithm of one minus absorptance (absorption fraction:

) as measured on a uniform sample". For decadic absorbance,^[3] this may be symbolized as If a sample both transmits and remits light, and is not luminescent, the fraction of light absorbed remitted and transmitted add to 1: Note that and the formula may be written as For a sample which does not scatter, and yielding the formula for absorbance of a material discussed below.

Even though this absorbance function is very useful with scattering samples, the function does not have the same desirable characteristics as it does for non-scattering samples. There is, however, a property called absorbing power which may be estimated for these samples. The absorbing power of a single unit thickness of material making up a scattering sample is the same as the absorbance of the same thickness of the material in the absence of scatter.^[4]

Optics

In optics, absorbance or decadic absorbance is the common logarithm of the ratio of incident to radiant power through a material, and spectral absorbance or spectral decadic absorbance is the common logarithm of the ratio of incident to spectral radiant power through a material. Absorbance is dimensionless, and in particular is not a length, though it is a monotonically increasing function of path length, and approaches zero as the path length approaches zero.

Mathematical definitions

Absorbance of a material

The absorbance of a material, denoted, is given by

$$A\; =\; \backslash log\_\; \backslash frac\; =\; -\backslash log\_\; T,$$

where

• $\backslash Phi\_\backslash text^\backslash text$ is the radiant flux by that material,
• $\backslash Phi\_\backslash text^\backslash text$ is the radiant flux by that material, and
• $T\; =\; \backslash Phi\_\backslash text^\backslash text/\backslash Phi\_\backslash text^\backslash text$ is the transmittance of that material.

Absorbance is a dimensionless quantity. Nevertheless, the absorbance unit or AU is commonly used in ultraviolet–visible spectroscopy and its high-performance liquid chromatography applications, often in derived units such as the milli-absorbance unit (mAU) or milli-absorbance unit-minutes (mAU×min), a unit of absorbance integrated over time.^[5]

Absorbance is related to optical depth by

$$A\; =\; \backslash frac\; =\; \backslash tau\; \backslash log\_\; e\; \backslash ,,$$

where is the optical depth.

Spectral absorbance

Spectral absorbance in frequency and spectral absorbance in wavelength of a material, denoted and respectively, are given by

where

• $\backslash Phi\_^t$ is the spectral radiant flux in frequency by that material;
• $\backslash Phi\_^i$ is the spectral radiant flux in frequency by that material;
• $T\_\backslash nu$ is the spectral transmittance in frequency of that material;
• $\backslash Phi\_^t$ is the spectral radiant flux in wavelength by that material;
• $\backslash Phi\_^i$ is the spectral radiant flux in wavelength by that material; and
• $T\_\backslash lambda$ is the spectral transmittance in wavelength of that material.

Spectral absorbance is related to spectral optical depth by

where

• is the spectral optical depth in frequency, and
• is the spectral optical depth in wavelength.

Although absorbance is properly unitless, it is sometimes reported in "absorbance units", or AU. Many people, including scientific researchers, wrongly state the results from absorbance measurement experiments in terms of these made-up units.^[6]

Relationship with attenuation

Attenuance

Absorbance is a number that measures the attenuation of the transmitted radiant power in a material. Attenuation can be caused by the physical process of "absorption", but also reflection, scattering, and other physical processes. Absorbance of a material is approximately equal to its attenuance when both the absorbance is much less than 1 and the emittance of that material (not to be confused with radiant exitance or emissivity) is much less than the absorbance. Indeed,

$$\backslash Phi\_\backslash mathrm^\backslash mathrm\; +\; \backslash Phi\_\backslash mathrm^\backslash mathrm\; =\; \backslash Phi\_\backslash mathrm^\backslash mathrm\; +\; \backslash Phi\_\backslash mathrm^\backslash mathrm\backslash ,,$$

where

• $\backslash Phi\_\backslash mathrm^\backslash mathrm$ is the radiant power transmitted by that material,
• $\backslash Phi\_\backslash mathrm^\backslash mathrm$ is the radiant power attenuated by that material,
• $\backslash Phi\_\backslash mathrm^\backslash mathrm$ is the radiant power received by that material, and
• $\backslash Phi\_\backslash mathrm^\backslash mathrm$ is the radiant power emitted by that material.

This is equivalent to

$$T\; +\; \backslash mathrm\; =\; 1\; +\; E\backslash ,,$$

where

• $T\; =\; \backslash Phi\_\backslash mathrm^\backslash mathrm\; /\; \backslash Phi\_\backslash mathrm^\backslash mathrm$ is the transmittance of that material,
• $\backslash mathrm\; =\; \backslash Phi\_\backslash mathrm^\backslash mathrm\; /\; \backslash Phi\_\backslash mathrm^\backslash mathrm$ is the of that material,
• $E\; =\; \backslash Phi\_\backslash mathrm^\backslash mathrm\; /\; \backslash Phi\_\backslash mathrm^\backslash mathrm$ is the emittance of that material.

According to the Beer's law,, so

and finally

Attenuation coefficient

Absorbance of a material is also related to its decadic attenuation coefficient by

$$A\; =\; \backslash int\_0^l\; a(z)\backslash ,\; \backslash mathrmz\backslash ,,$$

where

• is the thickness of that material through which the light travels, and
• is the decadic attenuation coefficient of that material at .

If a(z) is uniform along the path, the attenuation is said to be a linear attenuation, and the relation becomes$$A\; =\; al.$$

Sometimes the relation is given using the molar attenuation coefficient of the material, that is its attenuation coefficient divided by its molar concentration:

$$A\; =\; \backslash int\_0^l\; \backslash varepsilon\; c(z)\backslash ,\; \backslash mathrmz\backslash ,,$$

where

• is the molar attenuation coefficient of that material, and
• is the molar concentration of that material at .

If is uniform along the path, the relation becomes

$$A\; =\; \backslash varepsilon\; cl\backslash ,.$$

The use of the term "molar absorptivity" for molar attenuation coefficient is discouraged.

Use in Analytical Chemistry

Absorbance is a widely used measurement in quantitative absorption spectroscopy. While the attenuation of a light beam can be also be described by transmittance (the ratio of transmitted incident light), the logarithmic formulation of absorbance is convenient for sample quantification: under conditions where the Beer's law is valid, absorbance will be linearly proportional to sample thickness and the concentration of the absorptive species.^[7]

For quantitative purposes, absorbance is often measured on a sample solution held in a cuvette, where the solution is sufficiently dilute that the linear relationship of the Beer's law holds. The cuvette provides a known and consistent path length for the light beam passing through the sample. Measuring first the absorbance of the cuvette and a "blank" solution containing no analyte, differences in absorbance between samples can be used to quantity the analyte. Spectrometers generally measure absorbance separately for a range of wavelengths: this data is then plotted as absorbance vs. wavelength.^[8]

Shade number

Some filters, notably welding glass, are rated by shade number (SN), which is 7/3 times the absorbance plus one:^[9]

For example, if the filter has 0.1% transmittance (0.001 transmittance, which is 3 absorbance units), its shade number would be 8.

See also

• Absorptance
• Tunable Diode Laser Absorption Spectroscopy (TDLAS)
• Densitometry
• Neutral density filter
• Mathematical descriptions of opacity

Notes and References

1. Encyclopedia: A . Henderson's Dictionary of Biological Terms . Lawrence . Eleanor . 1 . 0-470-21446-5.
2. Book: Van de Hulst, H. C. . Light Scattering by Small Particles . John Wiley and Sons . 1957 . 9780486642284 . New York.
3. Book: 10.1002/0470027320.s8401 . Glossary of Terms used in Vibrational Spectroscopy . Handbook of Vibrational Spectroscopy . 2006 . Bertie . John E. . 0471988472 . Peter R . Griffiths .
4. Book: 10.1255/978-1-901019-05-6 . Interpreting Diffuse Reflectance and Transmittance: A Theoretical Introduction to Absorption Spectroscopy of Scattering Materials . 2007 . Dahm . Donald . Dahm . Kevin . 9781901019056 .
5. Web site: GE Health Care . ÄKTA Laboratory-Scale Chromatography Systems - Instrument Management Handbook . 2015 . GE Healthcare Bio-Sciences AB . Uppsala . https://web.archive.org/web/20200315013424/https://cdn.gelifesciences.com/dmm3bwsv3/AssetStream.aspx?mediaformatid=10061&destinationid=10016&assetid=16189 . 2020-03-15 .
6. 10.1021/jz4006916 . How to Make Your Next Paper Scientifically Effective . J. Phys. Chem. Lett. . 2013 . 4 . 1578–1581 . 9. Kamat . Prashant . Schatz . George C. . 26282316 . 2013JPCL....4.1578K . free .
7. Book: Ham . Bryan M. . Analytical chemistry: a toolkit for scientists and laboratory technicians . MaHam . Aihui . 2024 . John Wiley & Sons, Inc . 978-1-119-89445-2 . 2nd . Hoboken, New Jersey . 235–237.
8. Web site: Reusch. William. Empirical Rules for Absorption Wavelengths of Conjugated Systems. 2014-10-29.
9. Web site: How Many? A Dictionary of Units of Measurement . Russ Rowlett . Unc.edu . 2004-09-01 . 2010-09-20 . 1998-12-03 . https://web.archive.org/web/19981203072555/http://www.unc.edu/~rowlett/units/dictS.html . dead .