ubuntuusers.de

via DuckDuckGo

Sim Card Slot Dell XPS LX502 wird nicht erkannt

Status: Gelöst | Ubuntu-Version: Kubuntu 12.04 (Precise Pangolin)
Antworten |

Bluemaniax

Avatar von Bluemaniax

Anmeldungsdatum:
1. Juli 2008

Beiträge: 147

Wohnort: Korschenbroich
Zitieren
1. Juli 2012 18:34 (zuletzt bearbeitet: 1. Juli 2012 18:35)

Ich möchte gern den im Dell XPS eingebauten Sim Slot unter Kununtu nutzen, jedoch wird dieser vom System nicht erkannt. Leider war eine Suche nach der Lösung bisher erfolglos.

Die Ausgabe von lsusb 

1
2
3
4
5
6
7
8
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 0408:2fb1 Quanta Computer, Inc. 
Bus 002 Device 003: ID 8086:0189 Intel Corp. 
Code

Ausgabe von usb-devices 

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=03.02
S:  Manufacturer=Linux 3.2.0-26-generic ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1a.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 6
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0024 Rev=00.00
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#=  3 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0408 ProdID=2fb1 Rev=09.01
S:  Manufacturer=CN07CN2C786641AE042AA00
S:  Product=Laptop_Integrated_Webcam_2HDM
C:  #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=250mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo
I:  If#= 2 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=(none)

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=03.02
S:  Manufacturer=Linux 3.2.0-26-generic ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:1d.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480 MxCh= 8
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0024 Rev=00.00
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=8086 ProdID=0189 Rev=69.19
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev=03.02
S:  Manufacturer=Linux 3.2.0-26-generic xhci_hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:04:00.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=5000 MxCh= 2
D:  Ver= 3.00 Cls=09(hub  ) Sub=00 Prot=03 MxPS= 9 #Cfgs=  1
P:  Vendor=1d6b ProdID=0003 Rev=03.02
S:  Manufacturer=Linux 3.2.0-26-generic xhci_hcd
S:  Product=xHCI Host Controller
S:  SerialNumber=0000:04:00.0
C:  #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub

Code

Benno-007

Anmeldungsdatum:
28. August 2007

Beiträge: 29240

Wohnort: Germany
Zitieren
1. Juli 2012 18:42

Und da? 

lspci
dmesg | egrep -i "modem|sim|umts|gprs|edge|card|net|eth"

Ist das Teil aktiviert? Schiebeschalter oder per FN-Tastenkombination?

Hast du beachtet, dass normale SIMs zugeschnitten/-stanzt werden müssen?

http://www.answerbag.com/q_view/615980

1. The first thing which you should kept in your mind is that it is 'Micro SIM card slot' not for simple SIM which are used for general mobile phones.

2.Now the good thing is that, every SIM should be converted in to 'Micro SIM' (Just go to any SIM card dealer and he will convert and takes some cost for it )

Bluemaniax

(Themenstarter)
Avatar von Bluemaniax

Anmeldungsdatum:
1. Juli 2008

Beiträge: 147

Wohnort: Korschenbroich
Zitieren
1. Juli 2012 18:50 (zuletzt bearbeitet: 1. Juli 2012 18:51)

lspci gibt folgendes aus

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff)
03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 (rev 34)
04:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)

Code

dmesg liefert

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.993427] NET: Registered protocol family 16
[    1.222646] i2c-core: driver [aat2870] using legacy suspend method
[    1.222650] i2c-core: driver [aat2870] using legacy resume method
[    1.224652] NetLabel: Initializing
[    1.224655] NetLabel:  domain hash size = 128
[    1.224657] NetLabel:  protocols = UNLABELED CIPSOv4
[    1.224668] NetLabel:  unlabeled traffic allowed by default
[    1.239957] NET: Registered protocol family 2
[    1.243693] NET: Registered protocol family 1
[    1.244482] audit: initializing netlink socket (disabled)
[    1.664283] NET: Registered protocol family 10
[    1.664619] NET: Registered protocol family 17
[    2.783163] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.783744] r8169 0000:06:00.0: eth0: RTL8168e/8111e at 0xffffc90000c74000, 84:8f:69:b3:38:ee, XID 0c200000 IRQ 50
[    2.783751] r8169 0000:06:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   11.813609] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.363335] type=1400 audit(1341157100.189:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=797 comm="apparmor_parser"
[   12.363372] type=1400 audit(1341157100.189:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=716 comm="apparmor_parser"
[   12.553237] NET: Registered protocol family 31
[   13.625302] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   13.625371] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   13.625419] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   13.625463] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   15.002235] type=1400 audit(1341157102.829:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1047 comm="apparmor_parser"
[   15.660543] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[   16.165275] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.024825] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.026591] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.472928] r8169 0000:06:00.0: eth0: link down
[   17.474476] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   17.475337] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   26.508527] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1563.745735] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1563.906490] r8169 0000:06:00.0: eth0: link down
[ 1563.906994] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1566.591617] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready

Code

So wie ich sehe wird sie hier nicht aufgeführt. Einen Schalter oder FN Funktion gibt es nicht.

Der Slot der SimCard ist für die normale größe ausgelegt und muss nicht zugeschnitten werden.

axt

Anmeldungsdatum:
22. November 2006

Beiträge: 34254
Zitieren
1. Juli 2012 21:37 (zuletzt bearbeitet: 1. Juli 2012 22:59)

Das Gerät hat die Bezeichnung Dell XPS L502X. Der kombinierte Wireless-Schiebeschalter befindet sich rechts.

Der Slot ist auch vorhanden, wenn kein UMTS-Modem eingebaut ist. Sicher, daß Du das mitbestellt hast?

Geh' nach dem Einschalten beim Erscheinen des Dell-Logos mit [F2] ins UEFI und check' unter Cellular, ob es vorhanden/aktiviert ist!

Bluemaniax

(Themenstarter)
Avatar von Bluemaniax

Anmeldungsdatum:
1. Juli 2008

Beiträge: 147

Wohnort: Korschenbroich
Zitieren
2. Juli 2012 17:52

Genau da ist mein Problem. Ich habe zwar den Slot aber die eigentliche Hardware ist nicht verbaut.

Wäre auch einfach zu schön gewesen ☺

Dennoch vielen Dank für eure Mühe.

axt

Anmeldungsdatum:
22. November 2006

Beiträge: 34254
Zitieren
2. Juli 2012 19:11

Den preislichen Unterschied hättest Du bemerkt. 😉
Antworten |